---
title: "Services | BioApps Sdn Bhd"
description: "Consultation, measurement and casting, fitting and alignment, and device training: four stages, attended throughout by the same clinical team."
url: https://bioapps.com.my/services/
---

# Services

Each device proceeds through four stages, attended throughout by the same clinical team.

1.  ![A patient in conversation with a clinician on the campus lawn](https://bioapps.com.my/assets/gallery/with-clinician.jpg)
    
    ## Consultation
    
    The patient is assessed by a certified prosthetist or orthotist. The residual limb or affected joint is examined, daily activity requirements are established, and the indications and limitations of the proposed device are explained. Referral letters and recent imaging should be brought to this appointment.
    
2.  ![Residual limb casts being laser scanned in the laboratory](https://bioapps.com.my/assets/lab-scanning.jpg)
    
    ## Measurement and Casting
    
    Limb length, volume and joint position are recorded, and a cast is taken. The cast forms the basis of the socket, ensuring that the device is fabricated to the patient rather than to a standard size.
    
3.  ![The locking liner pin entering a carbon fibre transtibial socket](https://bioapps.com.my/assets/below-knee/socket-detail.jpg)
    
    ## Fitting and Alignment
    
    The device is fabricated in the workshop adjoining the clinic and fitted to the patient. Alignment is adjusted through successive trials until the device is retained correctly in both standing and walking.
    
4.  ![A patient walking along a kerb wearing a below knee prosthesis](https://bioapps.com.my/assets/training-rotated.jpg)
    
    ## Device Training and Motion Analysis
    
    The patient is taught to put on, remove and care for the device, and a programme of exercises restores joint motion, strength and balance. Walking with the device is then recorded by three dimensional motion analysis, so that alignment is corrected from measured gait rather than observation alone. As the residual limb alters in volume over the first year, the socket is reviewed and adjusted accordingly.
    

## Fabrication On Site

Prosthetic and orthotic devices are fabricated in-house at our workshop located at Level G, South Tower, UMMC. Our in-house custom fabrication capability enables us to produce and complete devices according to individual patient requirements, without the need to outsource fabrication or return devices to external suppliers for further modifications.

Clinics are conducted across Peninsular Malaysia, with home visits arranged where travel is not practicable. A number of these devices are funded through SOCSO.

### Before Attending

-   First attendance: please bring the referral letter and any recent imaging.
-   Subsequent attendance: please bring the device for adjustment on site.
-   Parking is available in the UMMC South Tower basement.

[Book an Appointment](https://bioapps.com.my/book-an-appointment)